Die Handfunkgeräte von ENTEL zeichnen sich durch ausgezeichnete Qualität und überragende Leistungsdaten aus. Das robuste HT-644 hat eine hervorragend ablesbare, beleuchtete LCD sowie eine 2000mA Lithium-Batterie. Das Gerät ist völlig wasserfest (30min. auf 5m tauchdicht) und besonders handlich und leicht (nur 320gr). Es entspricht der IPX67 Norm für Wasserfestigkeit und dem MIL STD810 für Robustheit und hat einen Arbeitsbereich von -20°C bis +55°C.
Das HT644 ist mit einem 12V Ladeadapter-Kabel oder mit einem 230V Ladeadapterkabel lieferbar. Bitte geben Sie bei der Bestellung an, welches Kabel Sie möchten
Merkmale:
General
Frequency Range |
156 - 163.275MHz |
Channels |
All INT, USA & CAN Marine Channels |
Channel Spacing |
25 kHz |
Communication Method |
Simplex / semi duplex |
Antenna Impedance |
50 ohm |
Antenna |
Whip / stubby |
Battery Type |
2200 mAh Lithium-ion battery pack |
Operating Voltage |
7.6V |
Current Drain (nominal) |
40mA |
Duty Cycle (5/5/90) |
14.5 hours |
Microphone |
Internal condenser microphone |
Operating Temperature |
-20° to +55°C |
Construction |
Compliant MIL-STD 810C/D/E/F/G |
IP Rating |
IP68 (2 meters depth for 4 hours) |
Size (mm) |
59.5(W) x 130(H) x 37(D) |
Weight |
277g with battery and aerial |
Transmitter
Power Output |
5W High <1W Low |
Frequency Stability |
± 1.5ppm |
Modulation Limiting |
± 5.0KHz |
FM Hum & Noise |
>-40dB |
Unwanted Emissions |
<2nW up to 1GHz, <20nW from 1GHz to 2GHz |
Adjacent Channel Power |
70dBc |
Audio Response (FM) |
300Hz to 3KHz -6dB/Octave |
Audio Distortion |
< 5% |
FM Modulation |
16K0F3E |
Receiver
Frequency Stability |
± 0.5ppm |
Analogue Sensitivity |
-120dBm (0.2uV) for 12dB Sinad |
Intermodulation Response |
>68dB |
Adjacent Channel Selectivity |
>70dB |
Spurious Rejection |
>70dB |
Rated Audio Power |
0.5W |
Audio Distortion |
< 5% |
Hum & Noise |
>-40dB |
Audio Response |
300Hz to 3KHz -6dB/Octave |
Conducted Spurious Emissions |
<2nW up to 1GHz, <20nW from 1GHz to 2GHz |